Expert Answers about Tie Down Anchors
- Where is Stake Pocket Tie-Down Anchor WFSPDR Made
- The Stake Pocket Tie-Down Anchor - Black Powder Coat - 2-1/4" D-Ring - 4,000 lbs # WFSPDR is made in the United States.
view full answer... - What Size Hardware Comes with Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie-Down System
- The Replacement Anchor Plates for B&W Biker Bar Motorcycle Tie-Down Systems part # BWMC2305 come with 5/8"-2.5" hex bolts.
view full answer... - ATV/UTV Wheel Tie Downs That Are Made In The USA
- While we do not have an entire kit like the Erickson ATV E-Track Tie-Down Kit # EM98CV that is Made in the USA, we will have different parts that are Made in the USA.
For straps we have the Snap-Loc E-Track Tie-Down Strap # SLLS28RER. These 2" wide by 8' long straps have a safe working load of 1,467lbs each.
You can attach the straps to the Stainless Steel Snap-Loc E-Track Tie-Down Anchor # SLSS which is also Made in the USA and the stainless steel construction will outlast other anchors...
view full answer... - Will Tie-Down Anchors Stop Water Getting in Stake Pockets in 2005 Dodge Ram 2500 With Tonneau Cover?
- The Erickson Retractable Tie-Down Anchors for Truck Bed Stake Pockets # EM01003 will provide a type of seal to the stake pockets of your 2005 Dodge Ram 2500 but they are not designed to keep water out so I could not guarantee you that it will eliminate water into your truck bed. It should give you some relief from the water pouring in, however, as well as providing useful attachment points.
There are also simple stake pocket covers, the TruXedo Stake Pocket Covers # TX1704210 which are...
view full answer... - Attaching Snap-Loc E-Track Tie-Down Anchor # SLSS To Wood Trailer Floor
- A backing plate is a good idea when securing the Snap-Loc E-Track Tie-Down Anchor, part # SLSS to your trailer.
We do not have a backing plate that has mounting holes that would match up with the mounting holes of the # SLSS. The mounting holes on the # SLSS are spaced 5-1/8 inches apart and are 3/8 inch square holes so you may be able to fabricate a backing plate that will work with the anchor.
view full answer... - Weld-On D-Ring Tie-Down Anchor Similar To Brophy Bolt-On Tie-Down Anchor # SR15-C
- The # SR15-C D-Ring measures 2-1/4 x 2-1/4 inches. This is designed to be bolted on.
The closest we come to that size for a weld-on application is part # C83760. This is quite a lot larger than the # SR15-C, as it measures 4-1/4 inches wide x w-1/2 inches by 3/4 inches. The mount bracket measures 2-1/4 x 1-5/8 x 1-1/4 inch deep.
view full answer... - Is Erickson Hide-A-Hook Anchor # EM09094 Spring Loaded
- The Erickson Hide-A-Hook anchor, part # EM09094 is not spring loaded. There is a slight amount of friction keeping it in the closed position, but the tension provided by the tie-down or bungee would be needed to keep it in the open position.
view full answer... - Is There A Way To Tie Down The Cargo On The Inside Of The GearDeck Enclosed Cargo Carrier?
- The best way to load up the back is to have a soft bag of sorts to help eliminate that movement when you're driving. Other than that, playing the tetris game while loading will also help minimize the movement inside the GearDeck Enclosed Cargo Carrier # H00604.
view full answer... - How Much Does the Snap-Loc Panel Cart/Pushcart Weigh
- The Snap-Loc Panel Cart/Pushcart with E-Track Anchor Points part # SL1500PCR319-P that you referenced weighs around 25 lbs without the handles. For tie downs, you can use the Snap-Loc E-Track Tie-Down Strap w/ Ratchet and Soft Tie-Loop part # SLLS28RER or to join multiple together you can use the Connecting Strap for Snap-Loc Moving Dolly part # SLLS2E6R.
view full answer... - Do the Brophy Swiveling D-Rings Have Weep Holes
- I have another solution but the Brophy Swiveling D-Ring Anchors part # RR6K-4 do not have weep holes designed into them. I agree that they are a great idea and should have them. I have installed these in the past and drilled my own holes to ensure proper drainage I then touched up the holes with clear spray paint to help keep rust away.
The other option which does have weep holes to drain water and has the same capacity but you lose the Swiveling aspect is the etrailer D-Ring Tie Down...
view full answer... - Is There Maximum Kayak Length For Rhino-Rack Nautic Stack Kayak Carrier
- I took a look at the instructions, and there is no restriction on kayak length for the Rhino-Rack Nautic Stack Kayak Carrier # RRS520.
So you'll be just fine using the # RRS520 to carry your 16-17 foot kayaks.
I also wanted to add that if your vehicle doesn't have anchor points for your kayak's tie-down straps you can add them with the Rhino-Rack Anchor Straps # RRRBAS-2.
view full answer... - Parts Needed to Add a Storage Hatch on Enclosed Trailer
- It's exactly what you said, a hatch in the floor for some extra storage. Probably for ratchet straps to secure cargo in the trailer.
If you wanted to build your own (provided you have enough ground clearance to safely do so) you can use the Paneloc Butt Hinge # H418-204U and then the Trailer Rope Ring # RR02 for a handle.
Hardware and trim would need to be acquired at your local hardware store though.
view full answer... - How Much Does the CargoGlide 1500XL Sliding Truck Bed Tray Weigh?
- The CargoGlide 1500XL Sliding Tray for Trucks - 1,500 lbs - Steel Frame - 8" Rail - Drop Link # CG1500XL-9548GM has a shipping weight of 430 lbs so it likely will be just over 400 lbs when you remove the packaging. The assembled tray has a capacity of 1,500 lbs with tie down track weight capacity of 650 lbs for each of the 4 O-ring anchor points.
I've attached a couple photos to show fit and function.
view full answer... - Transom Tie-Downs For 5,000-LB Boat
- All of the ratcheting tie-downs we offer, have the retracting feature.
The highest rated transom tie-downs we offer are the BoatBuckle G2, part # IMF08893. The maximum break strength for these straps is 2,500-lbs each. The safe working load limit though is 833 pounds each.
view full answer... - Is The Price For TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2142 For The Pair
- Yes, the price you see for the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2142 is for the pair of front tie-downs.
Note: This tie-downs are a compatible fit for a 2019 Ram 3500 with an 8 Foot Bed - with board or step extending under bed and with a factory installed hitch or a TorkLift SuperHitch Magnum 30K.
If you need help finding the correct camper tie-downs for your application I'll just need to know the length of your Ram's bed, whether or not there are running...
view full answer... - Are Demco Replacement Tow Dolly Wheel Tie-Down Straps Made of Polyester Webbing OK to Use
- Yes, it is okay to use the polyester replacement Demco tie-down straps. It is a polyester webbing, which is a very common material for straps because unlike nylon webbing, for example, it does not stretch or absorb water, making it really good for outdoor use, like on a dolly.
There are three options for replacement Demco tow dolly tie-down straps, based on the length of the strap, measured from the end of the J-hook to the closest edge of the first cross-strap
- 14-1/4" J-Hook to Edge...
view full answer... - Truck Bed Camper Tie Downs for 2000 Ford F250 with Plastic Bed Liner
- As long as your camper is no longer than 8 feet, and you do not mind having the tie-downs permanently installed in the stake pockets, the # TDSF tie-downs would be my recommendation. Unlike the # HSSF, trimming or cutting the bed liner will not be required. The # TDHP tie down hardware will also be needed to attach the camper to the tie down bracket.
You can see current pricing by clicking the provided link.
view full answer... - How to Pick the Correct Transom Straps For a 9,000 lb. Boat and 2,500 lb. Trailer
- When choosing transom tie-downs you will want to choose a tie-down with a break strength that exceeds the weight of the lightest object. So in your instance, you will want a strap that exceeds the 2,500 lbs. that your trailer weighs. This is to ensure that the boat does not jump off of the trailer if you run over bumps or potholes.
The highest rated transom straps that we have are the BoatBuckle G2 Retractable, Ratcheting Transom Tie-Down Straps # IMF08893, but the break strength is 2,500...
view full answer... - Difference in Turnbuckle Mounting Holes on TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3006
- Thank you for your recent purchase of TorkLift Custom Frame-Mounted Camper Tie-Downs # TLF3006.
According to my contact at TorkLift the small notches that can appear on some of these turnbuckle mounting holes are simply "artifacts" of the plasma cutting process and are of no consequence in terms of your installation. It is just likely that these plates were cut at different points in the production run.
Each of the turnbuckle mounting plates (four in total when using both front and rear...
view full answer... - Aluminum and Steel TorkLift Camper Tie-Downs for 2019 Ford F-250 Super Duty With 6-3/4 Foot Bed
- There is a difference in price between the steel TorkLift Custom Frame-Mounted Camper Tie-Downs and the ones that are made from aluminum that fit your 2019 Ford F-250 Super Duty with a 6-3/4 foot bed, no boards or steps under the truck bed and either the factory hitch, SuperHitch Original 20K or SuperHitch Magnum 30K.
You can find the prices on the individual product page, and to convert that to Canadian money you will need to use your favorite conversion source; I'll also send a link...
view full answer...
Go To Results